Single-turn Absolute Encoder A/358HJ

Housing Ø58, shaft Ø10 h7 | Up to 1024 steps (10 bits) | Parallel, SSI or analog (mA or V) | 5, 15, 8–24, 18–28 or 10–30 V | IP54 shaft (IP65 sealed) | Gray or Excess

El ELCIS 358HJ (A/358HJ) es un encoder absoluto monovuelta óptico, patentado, de 2 a 10 bits.

Es óptico, con fuente LED y fototransistores, y entrega la posición en código Gray o Excess, hasta 1024 pasos por vuelta (10 bit). La salida es paralela; serie SSI (RS422), solo con código Gray o Excess; o analógica en corriente o tensión (0–10 V) con 10 bits de resolución.

Tiene base de material compuesto, tapa de Valox 420 y eje de acero inoxidable Ø10 h7 para 2 kg de carga radial/axial, resiste impactos de 50 G y vibraciones de 12 G, y trabaja entre 0 y +60 °C con protección IP54 en el lado del eje (IP65 en versión sellada).

  • Resolution of 2 to 10 bits: until 1024 steps per lap.
  • Five power ranges: 5 V and 15 V ±5 %, 8–24 V, 18–28 V and 10–30 V.
  • Analog output of 10 bits, in current or in 0–10 V in 360°.
  • Serial output SSI with transmission RS422, solo con código Gray either Excess.

Technical Frequently Asked Questions

What resolutions does the A/358HJ offer?

In Gray code, 8, 16, 32, 64, 128, 256, 512 or 1024 steps per revolution; in Excess, 180, 360 or 720. Other resolutions available upon request.

What limitations does analog output have?

Converts the 10-bit position (1024 div/revolution) into an analog current or voltage (0–10 V) for 360° of rotation. Available only with 15 V or 18–28 V power supply and 1024 resolution.

What connections does the A/358HJ support?

1 m cable (CV, IP65), 26-pin connector PT02A16-26P (CM5, IP65), 10-pin MS310A18-1P (CL, IP65) and 25-pin DB25P (CD4, IP64), with radial output (R).

Properties

FeatureSpecification
Mechanics
HousingØ58 mm
AxisØ10 h7 acero inoxidable (otros diámetros bajo pedido) (personalizable bajo pedido)
max radial/axial load.2 kg
Electric
InterfaceParallel (standard) · SSI (RS422) · analog current or voltage
Exit-side protectionIP64 to IP65 according to connection
Feeding5 V ±5 % · 15 V ±5 % · 8–24 V · 18–28 V · 10–30 V
Max. consumption.200–400 mA according to number of bits (customizable upon request)
Max frequency.50 kHz (customizable upon request)
Direction of rotationSwitchable (up/down)
Exit codesGray, Excess
Max resolution.1024 steps/turn (10 bit)
Protection and environment
axle-side protectionIP54 standard · IP65 sealed
max. continuous RPM6000 standard · 3000 sealed (intermittent: +30 %)
Impact/vibration resistance50 G (11 ms) 12 G (10–2000 Hz)
Operating/storage temperature0 … +60 °C / -30 … +85 °C (customizable upon request)
ReferenceConfiguration
A/358HJ-G-1024-1828-KP-CD4-R+VD4FA358HJG10241828KPCD4R+VD4FGray · 1024 pasos/vuelta · 18–28 V · NPN emisor abierto + PTC · 25 pines DB25P · IP64 · salida radial
ELCIS A/358HJ Single-Turn Absolute Encoder
Dimensional drawing of the ELCIS A/358HJ single-turn absolute encoder

Other products

Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Salida potenciométrica | Carrera 50 … 750 mm | Linealidad ±0,04 … ±0,2 % | Resolución < 0,01 mm | 42 V máx. | IP67 | Conector M12 o cable
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Eje Ø11 h7 de acero inoxidable | Hasta 65536 pasos × 4096 vueltas | SSI con preset, Gray o binario | Opc. Sin/Cos 1024 o RS422 16384 ppr | Alimentación 10–30 V | IP64 eje (IP66 sellado) | Eje opc. Ø6, 8, 9,52 o 10
Official logo of ELCIS Encoder, Italian manufacturer of incremental and absolute encoders and industrial measurement systems.
Carcasa Ø63 mm | Eje Ø6 h7 inoxidable | 1 a 25000 impulsos/vuelta | NPN, PNP, push-pull, driver, TTL | Alimentación 5–30 V | IP64 eje, IP66 sellado | Opción sinusoidal 1 Vpp
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
CAN SAE J1939 | Ø 22 mm | 16 bits por vuelta | Eje Ø 6 mm | 12/24 VDC (8 … 32 VDC) | IP50 / IP65 | Rango de medida: 44 vueltas (15840°)
Pesacam logo: Weighing systems for trucks
Digital indicator | 2/3 sensor management | IP67 front protection
NCTE sensores de par torsor.
NCTE Rotary Torque Sensor | 2000/2200 Series | 500Nm | 1,000-5,000 RPM
Official logo of Novotechnik, manufacturer of linear sensors, position transducers, and industrial encoders
Inductivo, sin contacto | SSI 24 y 25 bit | Carrera 100 … 1000 mm | Resolución 1, 5 o 10 µm | Linealidad ≤ ±100 µm | 18 … 32 VDC | IP67
Wall-mounted temperature sensors for indoor or outdoor use, with Pt100, 4-20 mA, 0-10 Vdc signal, with or without display
Shopping Basket