Why does the HSTT2eS omit the Dual Flange (44.0 mm) option of the Type 1 version if both reach 40,000 RPM?

That's correct, both sensors share the brutal 40,000 RPM ceiling (strict High Speed) under the same phantom inertia of 0.0003 kg·m². However, the HSTT2eS deliberately increases its torsional range to 200 Nm compared to the fragile 100 Nm of its smaller sibling. Operating 200 Nm of torsional tension on a tiny 44.0 mm flange would cause shearing of the mount. Therefore, Atesteo eliminates the lower compatibility and unifies the mechanical grip, guaranteeing a pure 66.0 mm PCD mount, safely dissipating the concentric load to protect the astonishing class of the 0.05%.

Can the optical reader (High Speed) survive the transverse heating of testbeds rotating at more than 30k RPM?

To prevent parasitic overheating, Atesteo eliminates mechanical inductive components. The 'eS' system implements transmission rings using only light beams in flight. Light is frictionless, preventing surface heating and the intrinsic thermal expansion or drift that would corrupt the measurement at a base 30,000 RPM (capable of reaching a peak of 40,000 RPM without burning out the rotor). A direct byproduct of being metal-blind and aseptic is that it becomes completely immune to the EMI noise emitted by aerospace e-axle inverters.

HSTT2eS Torque Sensor 200 Nm | 40,000 RPM | Ballistic Micrometry

Light-Beam Telemetry (Optical) | Extended Range 200 N·m | Peak 40,000 RPM | PCD Flange 66.0 mm | Inertia 0.0003 kg·m²

Manufacturer: CENSORED
Category: Alta velocidad (>35,000 RPM), Rotativo

The HSTT2eS (High Speed Torque Transducer – Range 2) represents the pinnacle of torque within the Atesteo ballistic family, capable of delivering cross-vectors of 200 Nm on ultra-high-speed test benches. Its micro-structured design is exclusively for severe e-axle turbines, aerospace robotics, and very high-speed electric motors. Despite doubling the torque capacity of its smaller counterparts, the HSTT2eS maintains an astonishing rotational ceiling of 30,000 RPM sustained and 40,000 RPM peak (under optional test configuration). All of this is integrated into a concentric central coupling via a flush-mounted 66.0 mm PCD flange, resulting in an inertial mass of just 0.0003 kg·m², which prevents fracture due to parasitic centrifugal force.

Like all "eS" generation technology, the Wheatstone bridge capture and transfer relies not on conventional electromagnetic rotors, but on a purely optical telemetry gun. The elimination of magnetic components provides the HSTT2eS with complete EMI shielding against radiated voltage spikes (dV/dt) from adjacent high-voltage electric motors. The result is a completely pure and friction-free measurement profile of class ≤±0.05%, unaffected by frictional heating. Ideal for testbeds exploring the dynamic limits of tomorrow's motors. Dimension your control engineering by navigating the Torque Sensor category for ballistic regimes, or contact for central level integration from the Guemisa Homepage.

Properties

Nominal Metrological Range (Nm)	200 N·m (Extra Capacity – Micro-Torsional)
Rotational Limit Testbed	30,000 RPM Continuous / 40,000 RPM (Ballistic Peaks Option)
Metric Concentricity Diameter	Strict ISO Flange 66.0 mm (Anti-Vibration Mount)
Structural Inertia Density	0.0003 kgm² (Zero Profile against Centrifugal Force)
Class Verification (Under Load)	≤ ±0.05% (Unaltered by Micro-Friction)
Aseptic Reading Telemetry	Multipoint Optical Beam (Rejects Galvanic Connection)
EMI Metrological Resilience	Total Blocking of Electromagnetic Derivatives from Inverters
Reference Thermal Tolerance	10…60 °C (Zero Relative Thermal Stable Deviation)
Purpose Sectoral Deployment	High-Speed Electric Motors / Aircraft / e-axle Components

Other products

Torque Sensor F3eS 30000-50000 Nm | 5,500 RPM | Aseptic Optical Transmission

Digital Optical Acquisition | 30,000 – 50,000 N·m | 5,500 RPM | PCD Flange 290.0 mm | Inertia 0.5695 kg·m²

Muy alto par (10,000-150,000 Nm), Rotativo

Torque Sensor DF plus HS 500-4,000 Nm | 40,000 RPM | High Resolution Performance

Inductive (Dual-Frequency) | 500 N·m – 4,000 N·m | Up to 40,000 RPM | PCD Flange 105.0 mm

Alta velocidad (>35,000 RPM), Rotativo

HSTT2eS Torque Sensor 200 Nm | 40,000 RPM | Ballistic Micrometry

Light-Beam Telemetry (Optical) | Extended Range 200 N·m | Peak 40,000 RPM | PCD Flange 66.0 mm | Inertia 0.0003 kg·m²

Alta velocidad (>35,000 RPM), Rotativo

Torque Sensor F0eS-SV 100-1,000 Nm | 20,000 RPM | Optical-Inductive Technology

Digital Optical or Inductive | 100 – 1,000 N·m | 20,000 RPM | Titanium / Steel Rotor

Medio par (100-1,000 Nm), Rotativo

Torque Sensor SiS Z50 100 Nm | 25,000 RPM | Rigid Inductive Dynamometry

Inductive Telemetry | 100 N·m | 25,000 RPM | PCD Flange 101.5 mm | Inertia 0.00350 kg·m²

Bajo par (0.5-100 Nm), Rotativo

Torque Sensor TiS Z50 50/100 Nm | 25,000 RPM | Dynamic Titanium Rotor

Electromagnetic Acquisition (iS Series) | Flexible Range 50 – 100 N·m | Titanium Forging | 101.5 mm PCD Flange | Inertia 0.00210 kg·m²

Bajo par (0.5-100 Nm), Rotativo

Torque Sensor F1eS 200-3,000 Nm | 30,000 RPM | Precision Optical Technology

Optical Telemetry (10 kHz) | 200 – 3,000 N·m | 30,000 RPM | PCD flange 101.5 mm | Inertia 0.0113 kg·m²

Muy alto par (10,000-150,000 Nm), Rotativo

Torque Sensor F4iS 60000 Nm | 8,000 RPM | High Torsional Stiffness

Inductive PCM Transmission | 60,000 N·m | 8,000 RPM | PCD Flange 369.0 mm | Inertia 1.6378 kg·m²

Muy alto par (10,000-150,000 Nm), Rotativo

Steering Wheel Torque Sensor 50-400 Nm | Dynamic Steering Angle | Road-Drive Test

Driving Telemetry | Stepped Range 50 – 400 N·m | Class Accuracy ±0.10% | Analog Output ±10V | 16-Bit Resolution

Accessories

Torque Sensor F0iS-SV 100-1,000 Nm | 15,000 RPM | Extended Range Inductive Technology

Inductive Telemetry (iS) | 100 – 1,000 N·m | 15,000 RPM | Inertia 0.0007 kg·m²

Medio par (100-1,000 Nm), Rotativo