Schreiber Messtechnik SM17
Schreiber Messtechnik SM17
- Manufacturer: Schreiber Messtechnik
- Category: Signal converters, Displacement, LVDT, SENSORS
The Schreiber Messtechnik SM17 is an ASIC module designed for precision circuitry with inductive displacement and angle sensors. This module is essential for applications requiring accurate displacement and angle measurements, offering an efficient and adaptable solution for various industrial measurement needs.
Properties
- Feeding:
- Operating voltage: ±9 V to ±16 V DC.
- Maximum voltage: 36 V DC.
- Oscillator:
- Output frequency: 10 kHz.
- Waveform: Sinusoidal.
- Output amplitude: 5.0 V.
- Demodulation:
- Type: Track and hold circuit (Dynamic Traca.
- Cut-off frequency: 4 kHz.
- Integration:
- Encapsulation: SO14.
- It requires few components to operate, facilitating the creation of precision circuits for inductive sensors.
Other products
I-27Q Miniature incremental encoder, 6.35x8 shaft, pulses from 50 to 800 pulses/revolution, body diameter 30
I/41S – Miniature Incremental Encoder, Shaft Ø 6×10 mm, Body: Ø 40×52.5 mm, Pulse range: 1 to 2,540
Conductivity sensor, CLAMP connection, K range = 0.1, temperature range -5 to 85ºC
4 electrodes, K=1cm-1 (2 to 2,000mS) 1″ BSP thread, PVC body material, PT-100 for temperature measurement, up to 80ºC, 7pin connector
ORP probe by immersion in PVC tube. Length 720 mm. With SZ265 probe
4/20mA cable converter for 1 load cell, Built-in multiplexed 4/20mA output signal (allows individual control of each cell)
2-channel encoder isolator-amplifier-duplicator-adapter. Up to 1 MHz (adapts simplex signals to differential signals).
Torque sensors from 50 to 20,000 Nm, accuracy ≤ 0.05 % (0.03 % optional), up to 30,000 rpm on F0iS