Signal conditioner for LWH and TLH MUW 200/250
Budget-friendly price Request a quote
Output 0…10 V, 0…20 mA or 4…20 mA | For LWH and TLH | 18…30 VDC | Typical linearity 0.01 % | IP 65 | Cable Ø 4…10 mm
- Manufacturer: Novotechnik
- Category: Signal converters, INSTRUMENTATION, Resistance and Potentiometers
Novotechnik MUW 200/250 signal conditioner. Interface module on DIN connector 43650.
Interface module for LWH and TLH series position transducers, in a DIN 43650 connector enclosure. Input > 10 MΩ; standard output 0…10 V, 0…20 mA or 4…20 mA. Typical linearity 0.01%, typical temperature coefficient 30 ppm/K, IP 65. 200 series: fixed range and zero point; 250 series: adjustable with spindle trimmers.
Key points
- Interface module for TLH and LWH series position transducers
- Standardized output signals: 0…10 V, 0…20 mA and 4…20 mA
- Typical linearity 0.01%
Technical Frequently Asked Questions
How do I order the MUW 200/250 signal conditioner?
For example, MUW-250-1 (Art. 400054152) is the 250 series version, with adjustable range and zero point, and 0…10 V output. All order references with their Art. are listed in the reference table on this page.
Under what conditions does the MUW 200/250 signal conditioner operate?
Operating temperature: -25…+70 °C. Protection: IP 65 (DIN 400 50 / IEC 529).
Properties
| Feature | Specification |
|---|---|
| What does it measure? | |
| Supported transducers | LWH and TLH Series |
| Input resistance | > 10 MΩ |
| Cursor signal capture | No load |
| Permissible connection resistance of the transducer | ≥ 700 Ω |
| How to measure | |
| Internal reference voltage for the transducer | > 10 V DC, short circuit proof |
| Linearity | 0.01% (typical) |
| Temperature coefficient* | 30 ppm/K (typical) |
| Zero point adjustment range (250 series) | 10 % |
| Gain adjustment range (250 series) | 1…2 |
| What delivers | |
| Exit | Charge or current |
| 0…20 mA | Maximum load impedance 500 Ω |
| 0…10 V | I max. 20 mA, short circuit proof |
| 4…20 mA | Maximum load impedance 500 Ω |
| Functions | |
| 200 Series | Non-adjustable range and zero point |
| 250 Series | Adjustable range and zero point with spindle trimmers |
| Direction of exit | It rises when moving the rod (LWH) or the cursor (TLH) from terminal 1 to 3 (supply state) |
| Reversal of direction | Swapping terminals 1 (black) and 3 (blue) on the insert |
| Connection cable orientation | In 90° steps, rotating the box insert |
| Special configurations | With other supply voltages, output voltages or adjustment ranges, available upon request |
| Food and environment | |
| Supply voltage | 18…30 VDC |
| Current consumption | max. 35 mA |
| Reverse polarity protection | Integrated |
| Working temperature | -25…+70 °C |
| Protection | IP 65 (DIN 400 50 / IEC 529) |
| Mechanical data | |
| Dimensions | View map |
| Connection terminals | Screw type, 0.5 mm² |
| Recommended cable | 3 or 4 braided wires with protective mesh, Ø 4…10 mm |
| Cable entry | Racor PG 11 |
| Weight | approx. 75 g |
| Included in the supply | 1 M3x40 center screw and 1 flat gasket |
| Accordance | |
| EU: Electromagnetic compatibility | Directive 2014/30/EU: EN 61326-1:2013, EN 61326-2-3:2013 |
| EU: RoHS | Directives 2011/65/EU and 2015/863/EU: EN IEC 63000:2018 |
| United Kingdom: Electromagnetic compatibility | SI 2016/1091: EN 61326-1:2013, EN 61326-2-3:2013 |
| United Kingdom: RoHS | SI 2012/3032 and SI 2020/1647: EN IEC 63000:2018 |
| Reference | Configuration |
|---|---|
| MUW-200-0MUW2000 | Art. 400054101 · Type and output: 200 Series, fixed, 0…20 mA |
| MUW-200-1MUW2001 | Art. 400054102 · Type and output: 200 Series, fixed, 0…10 V |
| MUW-200-4MUW2004 | Art. 400054103 · Type and output: 200 Series, fixed, 4…20 mA |
| MUW-250-0MUW2500 | Art. 400054151 · Type and output: 250 Series, adjustable, 0…20 mA |
| MUW-250-1MUW2501 | Art. 400054152 · Type and output: 250 Series, adjustable, 0…10 V |
| MUW-250-4MUW2504 | Art. 400054153 · Type and output: 250 Series, adjustable, 4…20 mA |
Related documentation, cases, and guides
Technical documentation
- Novotechnik General Catalogue: Linear and Angular Position Sensors
- Technical definitions of potentiometers: linearity, RGV and hysteresis
- Novotechnik position sensors with IO-Link interface
- Position sensors for valves and actuators: Novotechnik series
- Novotechnik linear and rotary sensors for automotive applications
Other products
Magnetostrictive | IO-Link V1.1, COM 3 | Stroke 50 … 4250 mm | Resolution 1 or 5 µm | 1 to 3 position markers | 18 … 30 VDC | 350 bar · IP67 / IP68
Camisa de refrigeración por aire (Air-cooling Jacket) | Refrigeración forzada continua con aire comprimido | Para sensores láser Dimetix D-Series | Entornos de alta temperatura: acerías y fundiciones
8 digital signals to RS485 multiplexer
2-way universal galvanic isolator/converter. 2 channels, Input: 4/20 mA (Active/Passive), Output: 0-10 VDC, Power supply: 10-30 VDC
Process indicator, 32 x 74 format, LARGE FORMAT display, Pt100 input – Thermocouple – mA – Vcc – potentiometer
CANopen | Ø 36 mm | 16 bits per revolution | Shaft Ø 6 mm, Ø 10 mm or hollow Ø 6 mm | 12/24 VDC (8 … 32 VDC) | IP67 / IP69K | Measuring range: 44 revolutions (15840°)
Isolated multiplexer of 8 Pt100 probes, obtaining double output (0-4/20mA and 0/10V)
Thermocouple converter and Pt100, Pt500, Pt1000, Ni100. 2, 3 or 4 wires, programmable via PC
IO-Link | Ø 22 mm | 16 bits per revolution | Shaft Ø 6 mm | 24 VDC (16 … 30 VDC) | IP50 / IP65 | Measuring range: 44 revolutions (15840°)
-40 … +105 °C (Z-TH1) | Pressure ≤ 40 bar (Z-TH1-P32) | Stem Ø 10 mm and profile