Incremental Encoder Kit and Low Cost I/80EC
- Manufacturer: ELCIS Encoder
- Category: Encoder, Incremental Encoder, Low Cost Incremental Encoder, SENSORS
Industrial environments demand robust encoders for motor applications that can withstand harsh conditions without compromising signal integrity. The I/80EC model addresses these needs by offering a cost-effective solution with an architecture specifically designed to withstand vibrations and high mechanical loads in the field.
The technical solution integrates a hollow stainless steel shaft up to Ø15mm, an aluminum base, and a Valox 420 cover. It offers a starting torque of over 60gcm and a ball bearing life of 1.5 x 10^9 revolutions, guaranteeing continuous operational reliability in control systems.
Its construction withstands operating temperatures between 0 and 60°C with shock resistance of 50G. This Incremental Encoder Kit and Low Cost I/80EC is available in guemisa.es.
- Anodized aluminum base with Valox 420 lid for industrial durability.
- Hollow stainless steel shaft available from Ø6 to Ø15mm for tangential coupling.
- Impact resistance of 50G and vibration resistance of 12G, guaranteeing mechanical stability.
- Ball bearing service life greater than 1.5 x 10^9 revolutions under standard conditions.
Technical Frequently Asked Questions
How does the I/80EC differ from its sister model, the I/59CE?
Both share the same architecture, but the 80EC has an aluminum base and a Valox 420 cover, while the 59CE typically has a full metal housing. The 80EC is optimized for low cost in hollow-shaft motor applications.
What alignment precautions are required for the I/80EC shaft?
The maximum joint compensation allows axial ±0.2 mm, radial ±0.05 mm, and angular ±1°. It is crucial to respect these tolerances to avoid reading errors in the incremental system.
What connectors and output options are available?
NPN, PNP, Open Collector, and Push-Pull outputs are offered with a maximum current draw of 120 mA. Connections include options such as VD5, VH6, or terminal boxes, as specified in the connection datasheet.
Properties
| Feature | Specification |
|---|---|
| Sensor Type | Incremental |
| Main Application | Engines / Low Cost |
| Base | Anodized Aluminum |
| Cover | Valox 420 |
| Weight | 290 g |
| Axis | Ø 6÷15 mm Hollow Stainless Steel |
| Maximum Radial/Axial Load | 6 kg |
| Maximum Continuous RPM | 3000 rpm |
| Starting Torque | > 60 gcm |
| Bearing Life | 1.5 x 10^9 revolutions |
| Impact Resistance | 50 G x 11ms |
| Vibration Resistance | 12 G (10 ÷ 2000 Hz) |
| Operating Temperature | 0 ÷ 60 °C |
| Number of Impulses/Revolution | 1 ÷ 3600 |
| IP Protection Shaft Side | IP65 Standard |
Other products
