DPF215L2
Safety tilt controller for platforms.
- Manufacturer: DPF Sensors
- Category: Inclinometers, SENSORS
MEMS tilt switch with alarm for guides, towers and aerial lifts
Properties
2 axes, output via contacts.
MAXIMUM range +-15
Alarm control 3rd
Manual activation for verification.
Mechanical bubble level
Precision: 0,1%
Resolution: 0.04º
Other products
I/55 – Standard Incremental Encoder, Shaft Ø 6×10 mm, Body: Ø 55×56 mm, Pulse range: 1 to 2,540
1 load cell input converter module (bridge), allows up to 4 cells to be connected to the same input, and mediates the signal. RS485-Modbus output. 19 to 40 V DC power supply.
Universal converter for 1 to 4 load cells (mV input). Multiple outputs: 0-4/20mA and ±0/10V. Power supply: 24VDC. Includes an internal standard cell for testing and calibration.
Displacement sensor with ball joints, different diameters depending on the application, range up to 300 and 1250 mm.
High-Speed Communication (500 Hz / 2 ms) with IP65 Industrial Protection: Synchronous Real-Time Data Transfer for Critical Processes
Conductivity sensor, range K=0.1, working temperature 85ºC
Low value resistance converter to 4/20mA (Active/Passive) Input Low value resistance (5, 10 Ohm,..) Built-in datalogger Output: 0-4/20mA Power supply: 24VDC
16-channel 0/10V statically switched multiplexer
4 electrodes, K=1cm-1 (2 to 2,000mS) 1″ BSP thread, PVC body material, PT-100 for temperature measurement, up to 80ºC