ISO-20
Isolate 4/20mA or 0/20mA signals, 1 channel, NO auxiliary power supply required
- Manufacturer: DPF Sensors
- Category: 4-20mA / 4-20 mA, Process isolators, Signal converters, INSTRUMENTATION
Isolate 4/20mA or 0/20mA signals, 1 channel. They do not require auxiliary power; they are connected as a simple transformer. Two input cables and two output cables. The output provides active power, without auxiliary power. Protected against error when swapping inputs for outputs, they support output currents up to 500mA if 24V DC or reverse voltage is applied to the output.
Properties
Other products
Universal 3-way galvanic isolator V output (Ballasts)
General purpose displacement sensor, spring-loaded probe, ranges up to 200 mm, resistance up to 5 Kohm
Signal duplicator – 0/10V isolator (with excitation) input: 0/10V excitation (24V/20mA) isolated output: 2 x 0/10V power supply 24VDC (20.. 30V) isolated
2-way universal galvanic isolator / converter for CONTINUOUS CURRENT, DIRECT CURRENT INPUTS: ..10A .. 2A .. 0.5A .. 0.1A, and with external shunt unlimited range (0/±50.. 150mV), DOUBLE OUTPUT 0/20mA, 4/20mA, 0/5mA, .. 0/10V, 0/5V, … optionally 0/15.. 20V, 24Vdc power supply
Signal duplicator – isolator 0/±10V input: 0/±10V (24V/20mA) isolated output 2 x 0/±10V power supply 24VDC (20.. 30V) isolated
Universal converter for potentiometric position sensors (100 Ohm/500Kohm). Multiple outputs: 0-4/20mA, 0/10V and ± 0/10V. Power supply: 24.. 230VAC-DC (±15%) isolated.
Universal converter for up to 4 load cells, in an IP65-rated housing. Isolated inputs with adjustable sensitivity for each cell. Multiple outputs: 0-4/20 mA and ± 0/10 V. Dual power supply: 24 VDC and 115/230 VAC.
Divisor – pulse counter by an integer (1.. 999).
