ENERGY.3-O-DIS-RS
Three-phase network analyzer with indication, RS485, Input 3 x ..90Amp directly (through hole – 3 x 550VAC)
- Manufacturer: DPF Sensors
- Category: Signal converters, INSTRUMENTATION, Alternating current signal (Vac / IAC)
Three-phase power analyzer with indication, RS485, Input 3 x ..90Amp directly (through hole – 3 x 550VAC Isolated output RS485 Modbus (I, V, W, VA, F, cosP, energy, THD) Power supply 230VAC (±15%)
Properties
Other products
Quadrupler – signal isolator 0-10 Vdc input 0-10 Vdc isolated output 4 x 4/20mA (Active / Passive) + 4 x 0/10V, with power regulation adjustment: 24.. 230VAC-DC (±15%) isolated
Universal converter for potentiometric position sensors (100 Ohm/500Kohm). Multiple outputs: 0-4/20mA, 0/10V and ± 0/10V. Power supply: 24.. 230VAC-DC (±15%) isolated.
Dust concentration sensor
Isolator-converter input: 2 x 0/1000VDC to Isolated output 2 x 0-4/20mA active, Power supply: 24VDC (20.. 30V) isolated.
Profibus or Profinet to RS485 Modbus gateways and CANopen to Profibus or Profinet gateways
Comparator of the largest 2 inputs 0-4/20mA, 0/10V, Pot. Relay output
Quadrupler – 4/20mA signal isolator (with excitation) 4/20mA input, excitation (15V/20mA) isolated 4 x 4/20mA isolated output (Active / Passive) + 4 x 0/10V, with power supply regulation adjustment: 24.. 230VAC-DC (±15%) isolated
Three-phase network analyzer with indication, RS485, 3 x /5A input – 3 x 550VAC
Wire displacement sensor, ranges from 1000 mm to 4000 mm, with output signal in 5 Kohm resistance, 0-5 / 10 Vdc, 4-20 mA, RS485 or pulses, option with IP67 environmental protection
Monoaxial or biaxial, Range ±10° to ±90º, Monoaxial to ±180º Outputs 4…20- 0-5VDC, RS-232, Modbus, Canbus, Accuracy ±0.1º and repeatability of ±0.05