DIS48-PLUS

The analog input of the DIS48 Plus It is configurable and allows working with different types of sensors and transmitters, avoiding having to use a specific indicator for each type of signal.

Temperature sensors

• Thermocouples: K, S, R, J, T, E, N and B.
• Thermistors: Pt100, Pt500, Pt1000 and Ni100.
• Thermistors: PTC1K and NTC10K.

Analog process signals

• 0-1 V.
• 0-5 V.
• 0-10 V.
• 0-20 mA.
• 4-20 mA.
• 0-60 mV.
• Potentiometers from 1 to 150 kΩ.

This flexibility makes it possible to use the same controller with transmitters of pressure, level, flow rate, position, force, weight, temperature and other variables that provide a compatible analog signal.

The DIS48-PLUS does not function solely as a digital indicator. It incorporates a full range of functions. process regulation and control, Therefore, it can act directly on different elements of the installation.

The available regulatory algorithms include:

• ON/OFF control with hysteresis.
• Regulation P.
• IP Regulation.
• PID Regulation.
• PD Regulation.
• Manual and automatic tuning.
• Automatic/manual operation.
• Dual action heat/cold regulation.
• Soft-Start function.
• Configurable alarms.
• Timers.

The team has two relay outputs configurable for control or alarm functions, plus SSR/PNP outputs for driving external devices.

It also incorporates a Analog output configurable as 0-10 V or 4-20 mA, which can be used as a control signal or to relay the process variable or setpoint value to a PLC, recorder, remote indicator, or other data acquisition system.

The version DIS48-PLUS-T incorporates serial communication RS485 with Modbus RTU slave protocol and galvanic isolation.

This communication allows the controller to be integrated into industrial automation systems and communicate with them. PLCs, HMIs, SCADA systems, data loggers, gateways, and other Modbus devices.

Through serial communication it is possible to access controller variables and parameters, facilitating the monitoring and management of the process from external systems.

For RS485 installations, it is recommended to use cable of shielded twisted pair, following standard practices for Modbus industrial networks.

In addition to configuration via the front keypad, the DIS48 Plus It can be programmed quickly using NFC technology using a compatible Android smartphone and the app NFC-Plus Programmer.

Programming is as simple as bringing your smartphone close to the controller. This system is especially helpful for setting up, maintaining, and configuring multiple devices with similar parameters.

NFC programming makes it possible to:

• Read the parameters stored in the controller.
• Modify the instrument settings.
• Configure setpoint values.
• Save complete settings.
• Create backups of the parameters.
• Recover previously saved settings.
• Share configurations to facilitate maintenance and technical support.

One of the advantages of this system is that it allows you to prepare or modify the configuration using NFC. without needing to have the controller wired and powered.

Download PROGRAMMER-NFC-Plus on Google Play

Requires an Android device compatible with NFC technology.

The DIS48-PLUS uses the standard industrial format of 48 x 48 mm for panel mounting, with an installation cutout of 46 x 46 mm.

The front has protection IP65 when the equipment is correctly installed with its sealing gasket, while the container and terminals have IP20 protection.

Multi-range feeding 24…230 Vac/Vdc It simplifies its use in electrical panels and allows the same controller to be used with different auxiliary voltages.

Its combination of compact format, universal input and multiple outputs allows it to be used in both machinery and industrial installations where necessary. visualize, control, generate alarms or relay a process variable.

Does the DIS48 Plus support Pt100 input?

Yes. Its universal input allows you to connect sensors directly. Pt100, in addition to Pt500, Pt1000, Ni100, thermocouples, NTC, PTC and analog process signals.

Can it measure 4-20 mA and 0-10 V signals?

Yes. The DIS48-PLUS supports standard current and voltage signals, including 4-20 mA and 0-10 V, in addition to other voltage, current and millivolt ranges.

Does it have Modbus communication?

Yes, through version DIS48-PLUS-T, which incorporates communication RS485 Modbus RTU.

Is the DIS48 Plus just an indicator?

No. In addition to displaying the input signal, it incorporates functions of PID control, alarms, relays, SSR/PNP outputs and analog output, Therefore, it can be used directly as a process controller.

Can it be configured from a mobile phone?

Yes. It can be set up from an NFC-compatible Android smartphone using the app. NFC-Plus Programmer.

Do I need a 24 Vdc power supply?

Not necessarily. The DIS48-PLUS has multi-range power supply 24…230 Vac/Vdc, allowing its connection to different supply voltages within this range.