Reflective plate for Dimetix Laser Sensor
Reflective plate 210 x 297 mm For Dimetix laser sensor
- Manufacturer: DIMETIX AG
- Category: Displacement, Laser distance sensor, SENSORS
Reflective sheeting provides a sharp, highly reflective measurement target. It improves the reflected signal strength. The D-Series uses this enhanced signal strength to measure long distances. Please refer to the device specifications to ensure you are aware of the applicable minimum distances.
Properties
The reflective aluminum plate provides a defined measurement target. It improves the reflected signal strength. The D-Series uses this enhanced signal strength to measure long distances. Please refer to the device specifications to ensure the minimum applicable distances.
Other products
Black platinum electrodes, K=1cm-1 (2 to 2,000mS) Diameter 12 and 110 lake, body material PVidrio and epoxy, temperature, up to 70ºC, BNC connector with 1.5m long cable
Industrial inclinometer. Range 10º to 360º, 1 and 2 axes, Output signal 0.5-4.5 Vdc / 4…20 mA, CAN / RS485/ TTL / 422, Power supply 9…36 Vdc, IP67, Working temperature -40…+85ºC, accuracy ±0.2º
Anemometer with direct alarm output (adjustable) via relay contact. Also available with 4 to 20 mA output.
I/41S – Miniature Incremental Encoder, Shaft Ø 6×10 mm, Body: Ø 40×52.5 mm, Pulse range: 1 to 2,540
CONDUCTIVE ELECTRODES WITH BUILT-IN AMPLIFIER
Wall temperature sensor with Pt100 sensor, built-in Data Logger.